KinkyCrafter 20080827 – Packing for Dragon Con
Packing and getting ready to go. Should be a fun trip. Hoping to visit a local club while I’m in Atlanta, check out the local scene.
Packing and getting ready to go. Should be a fun trip. Hoping to visit a local club while I’m in Atlanta, check out the local scene.
Knife play class tonight at the club.
Have to finish a ton of work by Thursday if I’m going to be able to go to Dragon-Con.
Life has been a little crazy lately on all fronts, so it was nice to be able to take a day off and just decompress.
Helped out at the club, attended an artistic cutting class, and later did some rope work with a new friend.
KinkyCrafter 20080823 - Volunteering, Cutting, and Rope Work [ 3:08 ] Play Now | Play in Popup | Download (10)Listener feedback and plans for the weekend.
Hint: Snap Shackles win.
KinkyCrafter 20080821 - Snap Shackles vs Panic Snaps [ 10:44 ] Play Now | Play in Popup | Download (635)Diner and a show tonight. More hanging out and talking really, but you get the idea.
I talk a bit about my experience with Floating World, some of the great classes, regional differences, etc.
Got to see Jay Wiseman present on scene negotiations at the Crucible tonight. Other than that, just unpacking, playing with new toys and generally recovering from Floating World.
KinkyCrafter 20080818 - Negotiations and Con Recovery [ 2:15 ] Play Now | Play in Popup | Download (544)Home. Basically in one piece.
So many classes, so little sleep.
Great first day.
Yay! Looking forward to another fun filled weekend of learning, socializing, watching, and hopefully playing.
This project was completed at a local Crafter’s SIG meeting. Since the time was somewhat limited, no finishing work was done, but it gets the basic idea across.
A 30″x2.5″ strip of tool leather was cut out and bent in half. We then traced a handle shape into a 10″x2.5″x0.5″ block of ash. The wooden block was clamped to the table and the rough shape was cut out using a jigsaw. The shaping was then finished out with an Oscillating Edge/Belt Spindle Sander. A hand held router was used to carve out the inset areas where the leather overlaps the wooden handle so that the leather sits flush with the handle, and then the router was used to round off all the edges. The handle was then sanded smooth on all exposed surfaces. Holes were drilled in the handle for the leather rivets and a lanyard. Matching holes were punched in the leather and the edges were rounded off using an edging tool. The rivets were then put in to place and screwed tight.
Feel free to contact me with any questions that you have at evan@kinkycrafter.com.
Any questions?
KinkyCrafter 20080813 - Craft Segment - Leather Strap [ 6:19 ] Play Now | Play in Popup | Download (622)Interesting class on bondage tonight.